How to Fix if Your iPhone Says No service

iPhone Says No service

“I have a problem that is my iPhone is searching for a signal and appears “No Service”. You can’t activate it and anyway I still get “no service” or “searching for service”. But it doesn’t take coverage. Can someone tell me what I can do? Thank you.”

“Hello, I recently bought an iPhone 6s, 32G after updating it to iOS 13.1. My phone service does not detect and says no service. Someone would know how to explain to me what has happened or how to fix this problem? ”

The “No service” message shows when your iPhone is unable to connect to a mobile or mobile data network due to a software or hardware problem, or there is a fault with the SIM card. If it gives us data service, but not calls, it is most likely that it has been blocked by IMEI, but if it does not provide us with anything, data or voice, we can try some solutions that you will see here.

Let’s read an interesting article on How to take screenshot on MAC

What to do if iPhone Says No Service?

If iPhone 11, 11 Pro (Max), Xs, Xr, X, 8, 8 Plus, 7/7 Plus, iPhone 6s / 6s Plus / 6/6 Plus, iPhone 5s / 5c / 5, iPhone 4S or 4 says searching and then no service , there are various instructions to try to fix this problem.

1. Reboot the device

2. Test Airplane Mode

3. Reset network settings

4. Update operator settings

5. Test the SIM on another iPhone or mobile

6. Update or restore iOS with iTunes

1. Reboot the device

Reboot the device

The failure may be caused by some software process that is stuck, so restarting the device may be a solution.

2. Test Airplane Mode

airplane mode

If the iPhone continues to appear without a signal, you can go to Settings and activate the airplane mode. Wait about 10 seconds, then disable airplane mode. This will reset the network settings.

3. Reset network settings

Reset network settings

If you have a problem with the WiFi connection, mobile data, VPN, etc., just go to Settings> General> Reset> Reset network settings.

4. Update operator settings

Update operator settings

Sometimes, if you have not received an update from your service provider, the network may not have been updated with the latest necessary settings. In this case, you should check if there is any update of the operator configuration available and install it manually. Go to Settings> General> Information. If an update is available, you will see the prompt to select Accept or Update.

5. Test the SIM on another iPhone or mobile

Change the SIM for another or test the SIM on another phone to see if it is a matter of the phone or the SIM. If it works with another SIM, yours may be corrupted. You can go to a store of your operator and they help you.

6. Update or restore iOS with iTunes

In case the above six options were not enough to fix the iPhone 11, Xs, Xr, X, 8, 7, SE, 6s, 6, 5s, 5c, 5, 4S or iPhone 4 failure without service or coverage The last test you can do before you start thinking about a hardware failure is to restore your iPhone from iTunes.

Above all, I recommend that you keep your device updated. If you already have it updated to the latest iOS version but the iPad or iPhone still does not have service, restore it with iTunes and then you can restore a previously made backup.

If after performing the last point you are unable to obtain service, it is possible that the device has some hardware damage and it is necessary for the Apple technician to check it.

Check Also:

iPod Won’t Turn on or Charge? Steps to Solve This Issue

Any questions you have regarding “iPhone Says No service” you can leave it in the comments.

How to fix “Connection problem or invalid MMI code”

Connection problem or invalid MMI code

I’m sure most Android users have at some point received a message saying “Connection problem or invalid MMI code”. This can sometimes be so frustrating and so painful to deal with. When the invalid MMI error code appears, it simply means that calls and text messages cannot be sent until that particular problem has been resolved.

There are several problems for which the error message “Connection problem” or “Invalid MMI code” appears. The main reason, however, is probably due to service provider issues or issues related to SIM card authentication on your smartphone.

Solution for Connection problem or invalid MMI code

Try to restart your Android device

restart device

The first method you could try and fix the invalid MMI code error message would be to restart your smartphone first. Open in Network Settings. Then simultaneously press and hold the power and start buttons until all the lights on the phone are OFF. The smartphone will vibrate and restart.

Try to modify the prefix code

The other way to fix your Android phone connection problems would be to add a comma to the end of the prefix code. When you modify a prefix code, you will force the operation to run while ignoring any errors. Here are 2 different ways this can be done.

If the prefix code is, for example (* 5424 * 7 #) , you can add a comma on the back to make it look like this ( * 5424 * 7 #) without the square brackets.

You can use the + sign after the * to make it look like this (* + 5424 * 7 #) without the square brackets

Try to activate radio and activate IMS over SMS

activate radio and activate IMS over SMS

  • Open in bookmark
  • Type * # * ## 4636 # * # ** There is no need to press the submit button as the service automatically appears after you finish writing the code.
  • Tap on the device info or just on the phone info
  • Click on Run Ping Test
  • Press the “Turn off radio” key and your Android will restart.
  • Click on Restart

Try to check the network settings

Manually select your network operator

  • Open in Settings
  • Click on Network Connections
  • Hit on mobile networks
  • Click on Network Operators and choose the wireless provider after the search
  • Log in once again for another 3-4 tries before you can start working again

You can read the solution for not registered on network error or read Unfortunately, the process has stopped which is probably a solution to your problem.

Any questions you have regarding the error message “Connection problem or invalid MMI code” you can leave it in the comments.

How to fix Error “not registered on network”

not registered on network

If a message appears on your mobile that says “not registered on network”, it could be caused by a hardware or software problem.

However, in many cases, it is due to simple problems with quick solutions, which can make your mobile work again. It is a fairly common problem with Android devices across all brands and operators.

Most of the time, the user simply needs to restart the device or activate and deactivate airplane mode again, and this usually solves the problem of the unavailable mobile network.

However, sometimes it is necessary to re-register the phone and reconnect it with the operator.

These solutions for devices that appear as not registered on network, will serve you for both Android and iOS mobiles, and apply to all brands and models of mobiles, including, among others, Nokia, Samsung, iPhone, Motorola, Xiaomi phones, Sony, Blackberry, Apple, LG, Panasonic, Huawei and Sony Ericsson.

Without further ado, let’s discuss the possible causes and solutions for when your mobile appears as not registered on network.

How to fix a mobile that appears as not registered on network

Restart the device

Whenever a problem arises with an Android device, the simplest step is to restart your device.

To do this, you need to hold down the power button until a message appears to restart the phone, then select it and wait while the device turns on.

how to restart android device

This will clean up the RAM on the device and allow the operating system to start from a new starting point. Most of the time, this will fix any problems you find on your device.

Activate and deactivate “airplane mode”

If restarting the device did not work, another common solution when your mobile is not registered on the network is to swipe down from the top of the device screen to open “notifications” and select “airplane mode” in the quick action bar in the top.

airplane mode

Once selected, there may be a message confirming the selection: press OK and wait a few seconds, then return to the action bar and deactivate “airplane mode“.

What this does is disconnect the mobile from any signal and then reconnect it. When this method fixes the problem, it is usually because the device was unable to successfully jump from one signal to another, leading to the device behaving as if it were turned off.

This problem often occurs when you drive through areas where there is no signal.

Manually select your network operator

Sometimes, the mobile must be manually directed to locate your network operator. This is very much like searching for a Wi-Fi connection and selecting it manually when the device has difficulty doing it automatically.

Manually select your network operator

Try the following:

  • Open configurations.
  • Mobile networks option.
  • Network operators and wait while scanning the area for mobile connections.
  • Select your network operator from the list.
  • Check if the problem was solved.

Check the SIM card

Regardless of the operator, mobiles use a SIM card, which you can access by opening the back cover of the device and locating what looks like a microSD card inserted in a slot near the battery.

Turn off your mobile and carefully remove the SIM card.

If your mobile does not recognize the SIM card, inspect for signs of damage. If everything looks good, be sure to re-insert it without forcing it into the slot.

Sometimes, the card can be displaced from your site , for example by the impact of a fall, causing the device to display the notification “not registered on network”.

Water damage

how to fix water damaged phone

Mobiles, like any other electronic device, are very sensitive to contact with water.

If your mobile phone got wet, and although it seems that everything remains the same, the water could have damaged the components responsible for connecting to your provider.

Unfortunately, water damaged mobiles cannot be easily repaired and generally have to be replaced, or repaired by replacing the motherboard or other parts that may have been damaged or corroded due to excessive moisture.

In this article we give you some indications to fix a water-damaged phone, but if you do not succeed, you will have no choice but to take it to a trusted mobile repair center.

Something more about wireless networks

All mobile devices come with a wireless network connection that allows users to make calls to anyone outside of their network coverage.

And they work through different types of technologies. Different network service providers often do not use the same mobile network technology.

  • GSM : Global Mobile Communications System. It is the most widely used mobile network worldwide. Some more technologies that are incorporated into the GSM standard include GPRS and EDGE. They provide faster data transfer in 2g GSM networks known as abbreviated high-speed downlink packet access as HSDPA.
  • CDMA : Code Division Multiple Access. It is a newer mobile network technology that comes with increased data transmission capacity. For the 3g CDMA standard, the built-in technology is Evolution-Data Optimized or EV-DO.
  • LTE : Long-term evolution. It is the generation of mobile technology called 4g.
  • WiMAX : is another new entrant into the world of mobile technology. It is a close competitor to LTE and the first 4g network developed by Sprint. The HTC Evo was the first 4g phone they developed.


In some remote areas, there may be poor reception, and sometimes the signals do not reach the mobile, and this is simply because the signal is low or null in that area.

As soon as you are in an area where the signals are strong, the transmitter will be close and the strength of the signals will increase. If there is no coverage, the mobile network will not be available.

If your device appears as not registered on network, you will not be able to make or receive phone calls, send text messages or connect to the Internet unless you are using Wifi. On the other hand, if your mobile does not connect to Wi-Fi, it is probably a problem.

Many people factory reset their devices when they have the problem of “not registered on network”, without considering the consequences. And in most cases they forget to make a backup.

Always make sure to make a backup if you decide to restore your phone, because when you do, you will erase absolutely everything.

On the other hand, any damage to the software of a device can cause any type of problem, such as the mobile not charging well, until the mobile gets very hot.

For this reason, it will always be best to trust expert hands when faced with any inconvenience of our mobiles. Do-it-yourself often brings more problems than solutions.

Check Some Other Errors:

Mobile Network Not Available

Samsung keyboard keeps stopping

Any questions you have regarding the error message “not registered on network” you can leave it in the comments.

How to fix the error “Samsung keyboard keeps stopping”?

Samsung keyboard keeps stopping

Although Huawei has reached the top of the market in recent months, for a long time Samsung was the leading manufacturer of Android mobile devices at sales level worldwide, which is why there are many people who have Korean smartphones, and that is why it is always convenient to know all the tutorials in this regard.

On this special occasion, then, we want to show you one of those that we consider the most important step-by-step regarding the specific keyboard of these devices, since we are going to teach you how to fix the error “Samsung keyboard keeps stopping”.

The first thing you have to know is that if your mobiles shows a message like “Unfortunately, Android keyboard has stopped“, you are not the only one that has happened to it, since a huge number of users unfortunately go through this problem.

Samsung Keyboard Error

If you want to try this method, simply go to “Settings” or “Configurations” and then to “Applications” press where it says “All“.

When you are here, simply click on the three dots above to bring up a menu. What you are going to do now is press where it says “Reset settings” ready.

In a few words and to summarize a little what we have just commented, it is that to solve the problems that the Samsung keyboard has, you have to reset the settings of the applications. It is the only way to solve this problem.

Does it occur in some models more than others?Actually, no, it is a mistake that can occur on all models of Samsung phones. It can even happen on other mobile devices. After all, the applications are not perfect and every now and then having one or another error is quite common, more on Android.

If you face error like Mobile Network not available we have given solution in our website.

So, regardless of the model or the range of your mobile, you can have problems with the Samsung keyboard. But as you will see solving it will not consume more than a few seconds and best of all, anyone can do this process that we leave you above.

No need to have great knowledge to find the solution, from now on the Samsung keyboard will no longer be a problem and you can use your device without having to worry about this.

Solution for Samsung keyboard keeps stopping

For the reasons we mentioned before, then, we want to show you what we consider to be the two main methods that exist when it comes to solving the error related to the Android keyboard application.

Solution I: step by step

Go to Settings, Applications, and then in this menu go to the tab where it says All

Once you are in the all tab, you have to click on the menu that is located in the upper right corner marked with the three dots

There you must give Reset Settings, and with that you will have finished

Solution II: step by step

Take your mobile and go to Settings, and then to Language and input

On that screen you have to click on Samsung keyboard, and then go to Reset settings and Reset keyboard

Once you have carried out the previous step, a new window will open, where you can find the Cancel and Reset options.

Of course, the one you have to select in this case is the Reset

The two methods that we have just taught you will allow you to position your keyboard in its factory state.

Mobile phones where you can fix the error Unfortunately, Android keyboard has stopped

With the tutorials that we have just taught you, we are absolutely sure that you will not have problems to solve the error in question in a good number of terminals, among which we can mention, for example, the following:  Samsung J1, J5, J7, Galaxy S3, Galaxy S3 Mini or Galaxy S4.

Even if you have signature devices such as LG, Huawei or ZTE, it is likely that the previous step-by-step are also useful.

How to download any video from any website for free

savefrom net download youtube video

Although there are countless programs and applications for download any video from any website, there are few that really manage to offer the desired result.

For this reason, we explain the most viable alternatives to download videos from any website and for free from your computer.

How to download videos on web pages?

Surely on more than one occasion it will have happened to you that you try to download a video, but the server does not work or redirects you to another website without any result,

However, there are routes that are of great help in this regard. Among the options that have proven most successful in downloading free videos from any site are the following:

Online downloader

One of the simplest options for downloading videos is through an online downloader. But, we recommend the Videocyborg downloader (

To do this, when locating the video you want to download, you must click on the file name or on the YouTube option.


Once this is done, the site where the video is hosted should be opened immediately, there you just have to copy the video link.

After having the file link, you must open the main page of Vidocyborg and paste the URL of the video, in the indicated box and press the enter key.

In this way, the system will tell you to press the button to download video, and by doing so you will see how the file download starts automatically.

Add SS to URL

This second method is widely used with all the videos that are hosted on the YouTube platform. To do this, you must also open the video and shade the initial part of the URL: https: // www.

add ss to youtube

When doing this, you must delete this part of the link and replace it with the initials SS, and press the enter key.

Thus, the system will immediately redirect you to the Savefrom website (, and at the bottom you will see the video you want to download displayed and next to it a green download button , which allows you to choose the format and quality of the download.

savefrom net download youtube video

For its part, when selecting the format and quality, you just have to press the download button and you will see in the lower left.

Install Chrome extension

Unlike the previous two options, installing the download extension allows you to download almost any video, regardless of the website you are on.

Thanks to that, when doing so, the system will show you a green button that corresponds to the download option.

To start the process you just have to find and install the Tampermonkey extension , and being inside the extension window you only have to press the add to Chrome button.

tampermonkey chrome extension

When doing so, the system automatically shows us a new tab, which we simply must close.

Then, to complete the configuration, we must install the MeddleMonkey extension. But, through the savefrominstructions, so you can get the confirmation of the extension. Being inside the instructions window you must press the green button Install.

MeddleMonkey extension

Thus, when doing so, the system will guide us to another tab, where we must press the install button, and then close said window.

In this way, you will see how the two icons of the extensions appear in the upper right corner, which indicates that both have been activated correctly.

Now you can see that in almost all the videos a green button, which allows you to download quickly and safely.

Any questions you have regarding “download any video from any website” you can leave it in the comments.